 |
- Product Title: USB 1.1 over Cat5 Extender (up to 50m)
- Manufacturer/Publisher: Various
- Stock Code: VAR-USB50MEXT
- QuickCode: 12911
- Format: Hardware
- Product Group: USB Interfaces, Adaptors & Cables/Leads
- Condition: New
- Availability: Usually available from stock
- Description:
Extend your USB device up to 50m!
The CAT5 USB Extender can be used to extend the distance between a USB device and a host computer by up to 50m. It consists of a local unit with USB Type A Male (host computer side) and a remote unit (device side) with built-in USB Type A Female connector. Standard CAT5/5e/6 network cable (UTP or STP) (Not Supplied) is used to connect the two units together.
* Simple to install
* "Plug & Play"
* Compliant with USB 1.1 specification, OHCI and UHCI
* Extends a single USB port over low cost CAT5/5e/6 network cable (UTP or STP) by up to 50m
* Certain low speed USB devices may work up to 100m
* Bus-powered - no external power supply required for local or remote unit
* Connectors:
Local unit: Type A USB Male & RJ-45 Female
Remote unit: Type A USB Female & RJ-45 Female
* Stylish transparent plastic housing with silver internal coating
* 100% compatible with USB hubs and other devices
* Compatible with all major USB enabled operating systems
Please Note:
The CAT5 USB Extender introduces a USB signal delay according to the cable length used. This is equivalent to:
20m: 2 hubs
30m: 3 hubs
50m: 5 hubs
According to the USB standard, a maximum of 5 hubs may be used between a host computer and device, this includes any USB hubs, active extension cables or the equivalent hub rating of this USB Extender. Therefore, when using a 50m cable, no extra hubs or extension cables can be used between computer and device.
- Price: £96.00 Inc. UK VAT at 20% (where applicable)
- Free UK delivery on orders of £40 or more! (exceptions apply)
|