4D product information for

Left-angle microUSB-USB A Power Cable/Lead suitable for Raspberry Pi (0.25/0.3m)

Product Title: Left-angle microUSB-USB A Power Cable/Lead suitable for Raspberry Pi (0.25/0.3m)

Manufacturer/Publisher: Various

Stock Code: CAB-MICUSBUSB-CAB03LA

QuickCode: 17272

Format: Hardware

Product Group: Raspberry Pi: PSUs and Power Cables/Leads

Condition: New

Availability: Usually available from stock

Description:
Power lead to power your Raspberry Pi from a single USB output.
Suitable for a Raspberry Pi Model A. The cable is also suitable for Raspberry Pi Model B if the power source can supply 700mAmps
If powering from a USB hub please note the USB standards say that a maximum of 0.5Amp should be available on a USB Port. Cheaper USB hubs often do not restrict the output so can power a Model A or B. Better hubs may comply with the standard and not be suitable for a Model B and a Y lead will need to be used see here or here.
Rated for up to 1.4Amps
Cable Length: 25-30cm

Warning: cheap microUSB power leads we tested had a capacity of significantly less than a Model A or B can require.

Different companies define Left and Right angle differently. Please see our definition and the image below.

Right-angle lead: On a Model A+/B+/Pi 2 it goes away from the HDMI socket, on the original Model A/B, the cable comes out over the top of the Raspberry Pi's SD card in the same direction as the composite & audio cables.

Left-angle lead: On a Model A+/B+/Pi 2 it goes towards the HDMI socket, on the original Pi Model A/B, the cable comes out in the same direction as the HDMI cable.

Note that this cable may not suitable be suitable for use with some cases. e.g. on some Acrylic Cases a vertical pillar may get in the way.

Price: £6.60 no UK VAT to pay!

Free UK delivery on orders of £40 or more! (exceptions apply)