4D product information for

Battery backed Real Time Clock (RTC) for PandaBoard & flying Reset switch

Product Title: Battery backed Real Time Clock (RTC) for PandaBoard & flying Reset switch

Manufacturer/Publisher: 4D

Stock Code: 4D-PANDA-RTC-RST

QuickCode: 18044

Format: Hardware

Product Group: Pandaboard, Titanium & IGEPv5 systems & Accessories

Condition: New

Availability: Usually available from stock

Description:
A plug-in battery backed-up Real Time Clock module with temperature sensor for the PandaBoard & Pandaboard ES.

Specifications:
Real Time Clock chip: Maxim DS1338
Temperature Sensor: MCP9801 (LM75 compatible)
Cell (Battery): CR1220
Crystal Accuracy: 20ppm (better than 1 minute a month)
Battery Capacity: Approximately five years.
Suitable for original PandaBoard & PandaBoard ES.
PCB Plugs into 'Expansion connector A'
Reset Switch is on a flying lead.

Includes:
Real Time Clock Module with Temperature Sensor
CR1220 Battery (unfitted)
Fitting Instructions

Linux Software:
The standard DS1307 RTC driver will work with the module

RISC OS support:
RISC OS support for the RTC is built in.
Software to read from the temperature sensor is available from our website here

NB. This plugs onto "Expansion Connector A", which will need to be fitted to your PandaBoard. If you don't have this fitted, you can purchase a set of pins to solder in here.

Trade and volume enquiries welcome.

More information:
The RTC board has been designed so that as much of the expansion header is available as possible with a mixture of direct accessibility and pass through.

The board plugs into pins 1-6 and 23-28
Pins 7-22 can be accessed by plugging in connectors of the type reset switches normally use.
The pass through/ancillary connector (J3) on our board has:
1 GND
2 SDA (level shifted to 5V)
3 SCL (level shifted to 5V)
4 5V
5 SQW/OUT from clock (DS1338) at 5V level
6 ALERT from temperature sensor (MCP9801) at 5v level
7 Pin 3 (GPMC_AD7/SDMMC2_DAT7) via a 150R/Q1 for possible filing system activity LED (active low)
8 5V for GPIO LED if in use

We have fitted the board inside a Tigal case and being 1.1" high it is no higher than the USB/Network socket so should also fit other cases including Special Computing's acrylic case.

Price: £49.00 no UK VAT to pay!

Free UK delivery on orders of £40 or more! (exceptions apply)