CJE Micro's product information for

I/O Breakout Shim, straight pins

Image of I/O Breakout Shim, straight pins
Extra image of I/O Breakout Shim, straight pins
Product Title: I/O Breakout Shim, straight pins
Manufacturer/Publisher: PiFace
Stock Code: PIF-IO-SHIM-ST
QuickCode: 19795
Format: Hardware
Product Group: Raspberry Pi: GPIO, RTC & Sensors
Condition: New
Availability: Usually available from stock

Description:
Fits over the 26 or 40way GPIO header to provide a duplicate set of GPIO pins whilst still allowing full access to the original pins.
Supplied as a PCB and strip of pins. Soldering is required to fit the pins to the PCB.

The shim relies on a friction fit for contact and should be fitted once and never removed. If it is removed then to make reliable electrical contact the shim may need to be soldered to the Pi's GPIO pins. n.b. only the 3.3V, 0V, SDA and SCL lines are used by the RTC, but all lines are passed through by the shim.

Price: £9.50 Inc VAT at 20% (where applicable)
Free UK delivery on orders of £10 or more! (exceptions apply)

Review your shopping basket
View similar products Go to this product in the price list Go to CJE Micro’s homepage

For all your RISC OS requirements

Most orders of less than £10 will incur a £3 admin charge.
Items on special offer are while stocks last and may be time limited.
Items marked S/H are secondhand and have a 3 month warranty
Unless otherwise stated, photos are for illustrative purposes only
UK delivery included on orders of £10 or more (exceptions apply), please ask for overseas delivery cost.
Please check for compatibility. Official orders welcome. E&OE


If you have a sales enquiry please email our sales department
78 Brighton Road, Worthing, West Sussex, BN11 2EN, UK. 01903 523222 (full contact details)
If you have any comments or problems please email info@cjemicros.co.uk
CJE Micro’s is not responsible for the contents of external internet sites.
Last updated: Sat, 14 Apr 2018