4D product information for

PSU Fan (33 cubic metres/hour, 12dB) no plug fitted

Image of PSU Fan (33 cubic metres/hour, 12dB) no plug fitted
Product Title: PSU Fan (33 cubic metres/hour, 12dB) no plug fitted
Manufacturer/Publisher: Papst
Stock Code: PAP-FAN12
QuickCode: 18076
Format: RISC OS Hardware
Product Group: Spares: RiscPC/A7000
Condition: New
Availability: Usually available from stock

Description:
Made by Papst with sleeve bearings for low noise operation.
8412NGL
12V
12dB (3 bels
Sintec-Sleeve bearing
Air Flow: 33 cubic metres/hour (19.4 CFM)
0.6W
1500 rpm
-20 - 70 degrees C
Service Life 80,000 hours (40,000 @ 40 degrees C)
80mm x 80mm x 25.4mm

Mounting holes: 71.5mm x 71.5mm

Supplied with the bare wires for soldering or the user to fit crimp terminals and housing.

Caution should be taken when fitting as the high voltages can remain for some time after a power down, if in doubt get it fitted by someone with suitable experience.

8412NG, 8412NL, 8412NGML, 8412NML, 8412NGM, 8412NM, 8412NG, 8412N, 8412NGH & 8412NH are also available, they all have a higher air flow but are noisier!
They also are not on special offer so cost more!

Price: £28.50 no VAT to pay!
Free UK delivery on orders of £10 or more! (exceptions apply)

Review your shopping basket
View similar products Go to this product in the price list Go to CJE Micro’s homepage

Over 30 years experience

Most orders of less than £10 will incur a £3 admin charge.
Items on special offer are while stocks last and may be time limited.
Items marked S/H are secondhand and have a 3 month warranty
Unless otherwise stated, photos are for illustrative purposes only
UK delivery included on orders of £10 or more (exceptions apply), please ask for overseas delivery cost.
Please check for compatibility. Official orders welcome. E&OE


If you have a sales enquiry please email our sales department
78 Brighton Road, Worthing, West Sussex, BN11 2EN, UK. 01903 523222 (full contact details)
If you have any comments or problems please email info@cjemicros.co.uk
CJE Micro’s is not responsible for the contents of external internet sites.
Last updated: Sat, 18 Nov 2017