4D product information for
Red/Green bicolour 5mm LED with cable to suit most motherboards and our Raspberry Pi Power Control Module
- Product Title: Red/Green bicolour 5mm LED with cable to suit most motherboards and our Raspberry Pi Power Control Module
- Manufacturer/Publisher: 4D
- Stock Code: 4D-RPIPCMLED-RG
- QuickCode: 20243
- Format: Hardware
- Product Group: Raspberry Pi: Cases & Fixings inc. MiniITX
- Condition: New
- Availability: Usually available from stock
Special 5mm bi-colour Red/Green LED (so give orange if both lit). Wired on a 50cm (approx.) lead with three way 0.1" connector (middle pin earth).
We use this on our Raspberry Pi Power Control Module to provide a green LED for filing system read and red for filing system writes. Special software is required for this. No linux version is currently available but a RISC OS module can be supplied with the Power Control Module.
n.b. PC motherboards include a current limiting resistor in series with the LED. If you are not using this on a motherboard you should ensure a current limiting resistor is used. We use 82 Ohms when used with 5V source.
- Price: £9.00 no VAT to pay!
- Free UK delivery on orders of £10 or more! (exceptions apply)
Over 500 cables and adaptors stocked!
Most orders of less than £10 will incur a £3 admin charge.
Items on special offer are while stocks last and may be time limited.
Items marked S/H are secondhand and have a 3 month warranty
Unless otherwise stated, photos are for illustrative purposes only
UK delivery included on orders of £10 or more (exceptions apply), please ask for overseas delivery cost.
Please check for compatibility. Official orders welcome. E&OE
If you have a sales enquiry please email our sales department
78 Brighton Road, Worthing, West Sussex, BN11 2EN, UK. 01903 523222 (full contact details)
If you have any comments or problems please email email@example.com
CJE Micro’s is not responsible for the contents of external internet sites.
Last updated: Fri, 13 Jul 2018