4D product information for

2x Nylon bolts, nuts and spacers & 2 feet for Raspberry Pi Rev2 (Not Pi 2 or 3)

Image of 2x Nylon bolts, nuts and spacers & 2 feet for Raspberry Pi Rev2 (Not Pi 2 or 3)
Product Title: 2x Nylon bolts, nuts and spacers & 2 feet for Raspberry Pi Rev2 (Not Pi 2 or 3)
Manufacturer/Publisher: Fourth Dimension
Stock Code: 4D-RPI-BNSNMK2
QuickCode: 17639
Format: Hardware
Product Group: Raspberry Pi: Cases & Fixings inc. MiniITX
Condition: New
Availability: Usually available from stock

Description:
Hold your bare board Raspberry Pi in place!

Two Nylon bolts with Nylon spacers and nuts, and two self adhesive feet to hold your Raspberry Pi Rev 2 in place

Bolts are 16mm long and suitable for use with mounting boards 9mm thick

Also protects the components on the underside of your Raspberry Pi and ensures that the 'SD card present' detector does not short if placed on a conductive surface.

Raspberry Pi not included.

Price: £3.25 no VAT to pay!
Free UK delivery on orders of £10 or more! (exceptions apply)

Review your shopping basket
View similar products Go to this product in the price list Go to CJE Micro’s homepage

Over 6400 products available on line

Most orders of less than £10 will incur a £3 admin charge.
Items on special offer are while stocks last and may be time limited.
Items marked S/H are secondhand and have a 3 month warranty
Unless otherwise stated, photos are for illustrative purposes only
UK delivery included on orders of £10 or more (exceptions apply), please ask for overseas delivery cost.
Please check for compatibility. Official orders welcome. E&OE


If you have a sales enquiry please email our sales department
78 Brighton Road, Worthing, West Sussex, BN11 2EN, UK. 01903 523222 (full contact details)
If you have any comments or problems please email info@cjemicros.co.uk
CJE Micro’s is not responsible for the contents of external internet sites.
Last updated: Sat, 13 Jan 2018